Wavtech

The ART is the ultimate time saver. In some vehicles it can be difficult, or downright impossible to find a switched +12V source. In these instances, the ART is the solution. It provides an easy way to generate a +12V trigger for audio systems or small electronic devices, such as dash cams or radar detectors.

Wavtech 2-Channel Bass Restoration Processor

Wavtech Automatic Ignition Detection and +12V Dual Output Ge

The link1000.1mini is the most powerful amplifier in the Wāvtech mini series. This amp makes 1000 watts RMS @ 2ohms. The speaker level inputs of the link1000.1mini can handle up to 40V and have our adaptive loading technology, making for easy connection to both factory and aftermarket head units.

The link1000.5plus is the perfect complete system amplifier. One of the drawbacks of most 5-channel amplifiers is that while there is usually enough power for the front and rear main speakers, the power left over of the subwoofer is limited. Not so with the link1000.5plus.

The link1500.1plus is the result of extensive engineering and development. The goal was an amplifier with the same power output at either 2 or 1 ohm. This amp makes 1500 watts RMS @ 2 or 1 ohm. This is achieved with our new dual rail voltage power supply.

Wavtech 2-Channel Line Output Converter

The link300.4mini is in a class by itself. The most obvious thing is its extremely small size, but don’t Iet that fool you. Unlike most small footprint amplifiers, the link300.4mini is bridgeable. It can easily drive a nice set of components as well as a subwoofer.

The link500.1mini amplifier was engineered from the ground up to be the best possible option for adding bass to any system. The speaker level input can handle up to 40V and features our adaptive loading technology, while the RCA input accepts up to 10V, making it the perfect solution for both factory and aftermarket head units.

The link500.4mini is the perfect amplifier for this application. When used in 3-channel mode, the amplifier can produce 125 watts x 2 for the main speakers and 250 watts x 1 for the subwoofer, so it won’t lack for power.

The link700.4plus is the most versatile 4-channel amplifier available. Like the mini series multi-channel amplifiers, the plus series models have built-in summing. But with the additional width, it can now accommodate 6-channels of input. That means you can sum a 3-way OEM system and get front and rear full-range output, plus an RCA Pre-Out for a subwoofer amplifier.

Wavtech Plug-in Load Detect Resistor

Wavtech Remote Level Controller for LINKDQ

Wavtech's Patent Pending design changes the game for what is possible with a shallow subwoofer. With a mounting depth of less than 3”, if it won’t fit in the desired location, you probably aren’t putting a subwoofer there.

Wavtech's Patent Pending design changes the game for what is possible with a shallow subwoofer. With a mounting depth of less than 3”, if it won’t fit in the desired location, you probably aren’t putting a subwoofer there.

This is a shallow woofer, but it is big on performance. The 5” voice coil handles an impressive 750W RMS power, unheard of in a shallow subwoofer.

This is a shallow woofer, but it is big on performance. The 5” voice coil handles an impressive 750W RMS power, unheard of in a shallow subwoofer.

WavtechAmp+LOC 4ch 175x8@2 350x4@4

When upgrading your audio system in a typical front, rear and subwoofer set-up, the link6+ is the perfect tool for the job. Getting its input from your factory stereo’s front and rear speaker signal, it can provide front, rear and subwoofer outputs for your aftermarket amplifier or amplifiers.