Lutron RadioRA2 Plug-In Dimmer Module (snow white)

Features

• On a single-tap of the toggle button, lights fade On or Off
• On a double-tap of the toggle button, lights go to full On
• When On, press and hold the toggle button to engage the delayed long fade to Off
• Light levels can be fine-tuned by pressing and holding the raise/lower buttons until the desired light level is reached
• Control non-dimmable lighting loads in switching mode
• Power: 120 V 50/60 Hz
• Typical power consumption: 0.3 W, test conditions: load is off
• Regulatory approvals: cUL, UL, FCC, IC, SCT, NOM (-3PD only; -15APS pending)
• Environment: ambient operating temperature: 32°F to 104°F (0°C to 40°C), 0% to 90% humidity, non-condensing. Indoor use only
• Communications: plug-in modules communicate with the system through Radio Frequency (RF) and must be located within 30' (9m) of a repeater. System devices operate on frequencies between 431.0 MHz and 437.0 MHz
• ESD protection: tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2
• Surge protection: tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits
• Power failure memory: should power be interrupted, the RF Plug-In Module will return to its previous state when power is restored
• Warranty: 1 year limited warranty