Lutron RadioRA2 300W Lamp Dimmer (snow white)

MSRP: $188.00
Manufacturer: Lutron
SKU: RRD-3LD-SW

Features

  • Function much like standard lamp dimmers, but can be controlled as part of a lighting control system. Lamp Dimmers are useful in locations where plug-in lamps need to be dimmed or non-dimmable lighting loads need to be switched
  • Incorporate advanced features such as fade on / fade off, delayed long fade off and rapid full on
  • Simple to install and easy to use – allow floor and table lamps to be added to a system quickly and easily
  • On a single-tap, lights fade ON or OFF
  • On a double-tap, lights go to full ON
  • When ON, press and hold to engage the delayed long fade to OFF
  • Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached
  • Power: 120V ~ 50/60Hz
  • Typical power consumption: 0.25 W (Test conditions: load is off and nightlight mode enabled)

Specs

Power 120 V ~ 50 / 60 Hz
Typical Power Consumption 0.25 W
Test conditions: load is off and nightlight mode enabled.
Regulatory Approvals UL, CSA, NOM, FCC, IC, COFETEL
Environment Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C),
0% to 90% humidity, non-condensing. Indoor use only.
Communications Lamp Dimmers communicate with the system through Radio Frequency (RF) and must be located within 30 ft (9 m) of a repeater. System devices operate on frequencies between 431.0 MHz and 437.0 MHz.
ESD Protection Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.
Surge Protection Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits.
Power Failure Power failure memory: should power be interrupted, the Lamp Dimmer will return to its previous state when power is restored.
Load Type Incandescent, Halogen: 10W-300W
MLV: 10W/VA-200W/300VA
CFL, Fluorescent, ELV (Switching Mode Only): 10W-300W

 

Dimensions

HxDxW 3.75" x 0.9375"/0.6875" x 2.4375"
Cord Length 6'

 

Product Files
SPEC SHEETS

Features

  • Function much like standard lamp dimmers, but can be controlled as part of a lighting control system. Lamp Dimmers are useful in locations where plug-in lamps need to be dimmed or non-dimmable lighting loads need to be switched
  • Incorporate advanced features such as fade on / fade off, delayed long fade off and rapid full on
  • Simple to install and easy to use – allow floor and table lamps to be added to a system quickly and easily
  • On a single-tap, lights fade ON or OFF
  • On a double-tap, lights go to full ON
  • When ON, press and hold to engage the delayed long fade to OFF
  • Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached
  • Power: 120V ~ 50/60Hz
  • Typical power consumption: 0.25 W (Test conditions: load is off and nightlight mode enabled)

Customers who bought this item also bought
Picture of Lutron Caseta Smart Bridge Pro II (white)

Lutron Caseta Smart Bridge Pro II (white)

L-BDGPRO2-WH
Lutron Caseta Smart Bridge Pro II (white)
MSRP: $180.00