Crux 2012+ Toyota Radio Interface with SWC and RVC Retention

Crux 2012+ Toyota Radio Interface with SWC and RVC Retention
MSRP: $153.30
Manufacturer: Crux
SKU: SWRTY-61N
The CRUX SWRTY-61N is a radio replacement interface for select Toyota vehicles.It facilitates the integration of an after-market radio to enable retention of certain factory features when replacing a factory-installed radio. This enhanced interface retains the factory rear-view (backup) camera and is also pre-programmed for retention of steering wheel controls.
Features
  • Retains factory features in select Toyota vehicles while functioning with an aftermarket radio.
  • Pre-programmed to retain factory Steering Wheel Controls.
  • iPhone Voice Recognition (VR) feature from SWC on select Kenwood, Pioneer, Alpine and JVC radios.
  • Retains OE Rear View Camera.
  • Supports BT-HF/A2DP/AVRCP profile on select aftermarket radio models.
  • Supports Pick Up/End Call, Pick up and Toggle between 1st and 2nd incoming call, AVRCP Track, Seek.
  • EIA color coded wiring for easy installation.
Vehicle Compatibility

TOYOTA

  • 2012 – 2017  4Runner
  • 2012 – 2017  Avalon
  • 2012 – 2017  Camry
  • 2012 – 2016  Corolla
  • 2013 – 2017  Highlander*
  • 2012 – 2017  RAV4
  • 2012 – 2017  Sequoia**
  • 2012 – 2017  Tacoma
  • 2013 – 2017  Tundra**
  • 2012 – 2015  Venza
Notes:
* 2013-2017 Highlander vehicles without OEM Navigation radio will NOT retain the factory back up camera.
** See Special Note on page 2 of manual.

The CRUX SWRTY-61N is a radio replacement interface for select Toyota vehicles.It facilitates the integration of an after-market radio to enable retention of certain factory features when replacing a factory-installed radio. This enhanced interface retains the factory rear-view (backup) camera and is also pre-programmed for retention of steering wheel controls.
Features
  • Retains factory features in select Toyota vehicles while functioning with an aftermarket radio.
  • Pre-programmed to retain factory Steering Wheel Controls.
  • iPhone Voice Recognition (VR) feature from SWC on select Kenwood, Pioneer, Alpine and JVC radios.
  • Retains OE Rear View Camera.
  • Supports BT-HF/A2DP/AVRCP profile on select aftermarket radio models.
  • Supports Pick Up/End Call, Pick up and Toggle between 1st and 2nd incoming call, AVRCP Track, Seek.
  • EIA color coded wiring for easy installation.
Vehicle Compatibility

TOYOTA

  • 2012 – 2017  4Runner
  • 2012 – 2017  Avalon
  • 2012 – 2017  Camry
  • 2012 – 2016  Corolla
  • 2013 – 2017  Highlander*
  • 2012 – 2017  RAV4
  • 2012 – 2017  Sequoia**
  • 2012 – 2017  Tacoma
  • 2013 – 2017  Tundra**
  • 2012 – 2015  Venza
Notes:
* 2013-2017 Highlander vehicles without OEM Navigation radio will NOT retain the factory back up camera.
** See Special Note on page 2 of manual.

Customers who bought this item also bought
70-1761
Metra 1987+ Toyota/Scion Turbo Wires
MSRP: $6.99
APSA
Install Bay All Purpose Spray Adhesive (single)
MSRP: $16.99
SWRCR-59
Crux Radio Replacement w/ SWC Retention for Chrysler, Dodge
MSRP: $159.95
PRX6903
Memphis Audio Power Reference Series 6x9 3-Way Coaxial Speakers with Swivel Tweeters - Pair
MSRP: $189.95
ET-60
ASKA 60' Electrical Tape
MSRP: $4.92
40-EU10
Metra 2002+ European Vehicle Antenna Adapter Cable
MSRP: $13.99
99-8251B
Metra 2016+ Toyota Tacoma DDIN
MSRP: $41.99