AVPro Murideo Fox & Hound A / V HDMI Distribution Testing KIT

• Generator:
  • Generate video signals up to 18Gbps with backwards compatibility. This gives you the ability to emulate any active content available
  • Test any display, repeater, or the system's infrastructure for HDR compatibility at the push of a button
  • Test cables before, during, or post installation to ensure bandwidth and functionality
  • Mimic any available source to ensure compatibility with any sink device. No need to carry a source for testing
  • Allows you to test a sink device or the entire system for HDCP compatibility
  • Test up to 8ch audio to ensure that audio is playing throughout the system
  • Easily identify 5v and that HDCP is present, eliminating guesswork
  • Bright, easy to read display
  • Portable and lightweight. No need to be tethered to a power outlet
• Analyzer: 
  • View live video signals up to 18Gbps ensuring that sources and repeaters are working throughout the signal chain
  • View video format information to ensure that a source or repeater device is sending out the correct video signal, up to 18Gbps
  • Verify that HDR is present on HDR capable devices, no more guesswork
  • Ensure that an HDMI or DVI cable is functional and passing the desired bandwidth. Check 5V, Hot Plug Detect, TMDS, and the DCC channel of the cable
  • Read or emulate EDID on any repeater or sink device during system setup or troubleshooting. No more guessing on what the EDID is
  • Analyze any version of HDCP to ensure compliance of a source or repeater device
  • Verify audio signals up to 8ch and analyze channel levels in real time
  • Bright, easy to read display
  • Portable and lightweight. No need to be tethered to a power outlet

• HDMI Version: HDMI 2.0
• HDCP Version: HDCP 2.2 and 1.4
• HDCP ON/OFF: Yes
• Maximum Clock Rate: 600 Mcsc (594 MHz)
• Maximum Throughput per Channel: 6.0 Gbits/sec (18 GBP/sec Total)
• Resolution Timings: VESA; Video Standard with 60, 59.94, 30, 29.97, 24, 23.98 fps; Video Standard with 50, 25 fps; 4k timings; AUTO and 10 USER Defined
• Video Encoding: RGB, YCbCr
• Audio: LPCM
• Audio Source: INT 1KHz test tone or EXT L/R IN
• Audio Sampling Rate: 32k, 44.1k, 48k, 88k, 96k, 176k
• Audio Sampling Bit Size: 16, 20 24, AUTO
• Audio Channels: 2
• Audio Volume: Yes
• Control: RS-232 and USB
• Firmware: Field Upgradable
• Power: 5V DC Li-Ion Internal Battery or Wall Adapter
• Battery Charger: Input 100-240VAC - 50/60Hz @.5A Output 5VDC @2A

• Size (H x W x D): 5.4” x 4.2” x 1.2”
• Weight: <1 lb.

• 2.0x Generator (Source)
• 2.0x Analyzer (Sink)
• 2 each 5 V DC/AC Power Supply / Charger (110-240 VAC) with set of International plugs (US, UK, AU, EU).
• Rechargeable Battery Pack (installed)
• Hard Case
• 3’ Micro USB to USB cable for firmware Updates
• User Manual (recommend you download latest version from F&H Site)

Click here for a Fox and Hound training video.