AudioControl Director Series 1U 16-Channel Matrix Amp w / Dante

• Support for Dante audio 
• Network DSP Amplifier with Volume Control
• 16 channels x 100 watts into 8 ohms (all channels driven)
• 16  channels x 200 watts into 4 ohms (all channels driven)
• 8 Bridgeable Channels of 400 watts into 8 ohms
• Built-in Speaker Optimization profiles
• Ethernet port for status monitoring, source switching, and 12 volt trigger control
• Network programmable graphic and parametric equalization with user memories
• Assignable names for amplifiers and all zones
• Digital signal sense
• Master 12 VDC In/Out trigger
• Programable electronic crossover for local subwoofer applications; subsonic filter
• AudioControl LightDrive™ Anti-Clipping Speaker Protection 
• Local inputs with pass through/loop outputs
• Dual analog bus inputs
• Compact 2 U rack space (includes rack mount brackets)
• Commercial or residential installation compatible 

• Inputs: 8 stereo local inputs, 2 coaxial/TOSLINK bus inputs
• Input Sensitivity: 1 Vrms for full output, level at maximum
• Input Gain: 30 dB
• Amplifier Channels: 16
• Power Output (8 Ω): 100 W per channel 
• Power Output (4 Ω): 200 W per channel
• Power Output (8 Ω bridged mono): 400 W
• Minimum Speaker Load: 4 Ω
• Preamp Audio Outputs: 8 stereo loop outputs, 2 coaxial digital S/PDIF outputs
• Crosstalk: > 80 dB @ 1 kHz
• Damping Factor: >300
• Signal to Noise: > 95 dB, A-wtd, ref full output 
• Crosstalk: >80 dB @ 1 kHz
• DAC Specifications: 32 to 96 kHz sample rate, 16-/24-bit depth
• Remote Power Trigger: +12 VDC or Dry Contact Closure
• Network Connection/Protocol: 10Base-T ethernet TCP/IP
• Communication Protocol: HTTP or telnet

• Size (W x D x H): 17” x 15.5” x 3.5”
• Weight: 21 lbs.

• Director Model M6800D
• Speaker Connectors
• Remote Connector 
• Power Cord
• Manual
• Warranty

Special Order Only