AudioControl 4 Channel High Power Dual Mode 70 Volt DSP Ampl

• Network DHCP Signal Matrix Amplifier With Volume Control
• 4 Channels x 750 Watts at 70/100 V or 2Ω/4Ω (All Channels Driven)
• 4 Channels x 500 Watts at 8Ω (All Channels Driven)
• 1500 Watts of Bridged Power at 70/100 V or 4Ω/8Ω
• Digital Signal Processing (DSP) Performance
• Built-In Speaker Optimization Profiles
• Ethernet Port for Status Monitoring, Source Switching and 12 Volt Trigger Control
• Built in Matrix Delivering Analog or Digital Inputs to be Routed To Any Zone or Digital Bus Output
• Network Programmable Graphic & Parametric Equalization with User Memories
• Assignable Names for All Zones & Amplifier
• Digital Signal Sense
• Programmable Electronic Crossover for Local Subwoofer Applications; Subsonic Filter
• AudioControl LightDrive Anti-Clipping Speaker Protection
• Digital and Analog Inputs with Digital and Analog Pass Thru / Loop Outputs
• Dual Digital Audio Bus Outputs
• Commercial and Home Installations

• Inputs: 8 Balanced Inputs, 8 Unbalanced RCA Inputs, 2 Digital Combo Coax/Toslink Inputs
• Input Sensitivity: 1 Vrms for full output, level at maximum
• Input Gain: 30 dB

• Amplifier Channels: 4
• Power Output (70 V / 100 V): 750W per channel
• Power Output (70 V / 100 V Bridged Mono): 1500W
• Power Output (8Ω): 500W per channel
• Power Output (2Ω / 4Ω): 750W per channel
• Power Output (4Ω / 8Ω Bridged Mono): 1500W
• Minimum Speaker Load: 2Ω
• Preamp Audio Outputs: 4 Balanced, 4 Unbalanced RCA, 4 Digital Coax Loop Outputs

• Remote Power Trigger: +12 VDC or Dry Contact Closure
• Network Connection/Protocol: 10BaseT Ethernet TCP/IP
• Communication Protocol: HTTP or Telnet
• Weights & Dimensions
• Dimensions: 17” W x 15.5” D x 3.5” H (2U)
• Weight: 18.5 lbs (8.4 kg)

• Model CM4-750
• Speaker Connectors
• Remote Connector
• Power Cord
• Manual
• Warranty

Special Order Only